Comparison of blast pressure profile for military and commercial explosive with different point of initiation

A. Rahim, Farah Nadiah and Yusof, Mohammed Alias and Hashim, Fakroul Ridzuan and Ahmad, Khairol Amali and Ismail, Ariffin (2022) Comparison of blast pressure profile for military and commercial explosive with different point of initiation. In: International Conference on Innovation in Science and Technology (ICIST 2022), 14-16 December 2022, via virtual conference at Politeknik Semarang, Semarang, Indonesia. (Submitted)

[thumbnail of Artikel] Text (Artikel)
ComparisonOfBlast.pdf - Full text
Restricted to Registered users only until 31 January 2099.

Download (2MB)

Abstract

A blast wave profile caused by explosive explosion has been thoroughly studied for several decades. The propagation profile of the blast wave under circumstances has been predicted based on a sizable amount of experimental data.
However, most investigations have merely considered the explosive's centre point of initiation. In this study, the goal has been designed to compare the detonation velocities of commercial explosive (Emulex) and military explosive
(PE-4), as well as to examine how different initiation points for the two types of explosives affects the blast peak over pressure value. Three point of initiation has
been set to each charge which is top, centre and bottom. Experimentally, a 500 g of PE-4 and 500g of Emulex were hanged in the air and detonated at 1.2 metres above the ground. At various distance of 0.5 m, LO m, 1.5 m, 2.0 m, 2.5 m, 3.0 m, 3.5 m, and 4.0 m, pencil probes were set pointing at the explosive to capture the data from the explosion. With high accuracy of high-speed data acquisition
system (DAQ) and free field pencil probe at each distance, the blast peak overpressure was recorded. In this experiment, the fibre optic cable technology was used to measure the detonation velocity (VOD) for each explosive to validate the strength of the explosive before the blast took place. From the reading, the PE-4 was measured at 8,400 m/s whereas 5117 m/s for Emulex. The findings indicate that the PE-4 has a higher detonation velocity compared to Emulex.
During the experiment, each explosive's peak overpressure has been recorded. The PE-4 explosives produced the highest among all with a top point initiation of 4.21 MPa. With respect to the commercial explosive Emulex, the highest
pressure of 3.12 MPa has been recorded also at the top point of initiation. The findings demonstrate that for both types of explosives, the top point of initiation produces the largest peak over pressure, followed by the bottom point, while the centre point of the explosion recorded the lowest peak over pressure.

Item Type: Conference or Workshop Item (Paper)
Uncontrolled Keywords: Military explosive (PE-4), Commercial Explosive (Emulex), Point of initiation, Blast profile, Peak overpressure
Subjects: T Technology > T Technology (General)
T Technology > TA Engineering (General). Civil engineering (General)
T Technology > TH Building construction
U Military Science > U Military Science (General)
Divisions: Faculty of Engineering
Depositing User: Mr Shahrim Daud
Date Deposited: 05 Sep 2023 03:17
Last Modified: 05 Sep 2023 03:17
URI: http://ir.upnm.edu.my/id/eprint/283

Actions (login required)

View Item
View Item