Items where Subject is "TJ Mechanical engineering and machinery"

A

A Bakar, Muhammad Azhar (2017) Design and analysis of hard body armour composite mould system. Masters thesis, Universiti Pertahanan Nasional Malaysia.

A Bakar, Muhammad Azhar (2017) Design and analysis of hard body armour composite mould system. Masters thesis, Universiti Pertahanan Nasional Malaysia.

A/L Sreeramlu, Giri Ram (2020) Numerical Analysis on combustion inside RD-108 Rocket Nozzle. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Abd Kadir, Zulkiffli and Azman, Aina Nabila and Hudha, Khisbullah and Amer, Noor Hafizah and Zubir, Amrina Rasyada and Mohd Alawi, 'Alawiyah Hasanah (2023) Kinematic analysis of double pendulum for exoskeleton walking aid. In: 2023 11th IEEE Conference On Systems, Process & Control, 16 December 2023, Hatten Hotel, Melaka. (Submitted)

Abd Kadir, Zulkiffli and Mohamad Yusri, Mohamad Huzairi and Zubir, Amrina Rasyada and Hudha, Khisbullah and Amer, Noor Hafizah and Haniffah, Nur Akmal (2022) Yaw motion analysis of single-trailer truck using Yaw Amplification Factor (YAF). In: 2022 IEEE International Conference on Systems, Process & Control (ICSPS 2022), 17 December 2022, Melaka. (Submitted)

Abdul Aziz, Mohd Fazry (2020) Optimisation of thermal conductivity of phase change materials by using taguchi method. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Abdul Rahim, Norwazan and Abdul Rahman, Mohd Rosdzimin and Ahmad, Khairol Amali and Mat Sarip, Abd Rahim and Hasbullah, Syafawati and Suhel, Ameer (2023) Analysis of waste cooking oil biodiesel (WCO) synthesis with Ti02 impregnated CaO from waste shells nano-catalyst. In: The 13th International Conference on Key Engineering Materials (ICKEM 2023), 24 - 26 March 2023, Istanbul University, Turkiye. (Submitted)

Abdullah, Norli and Nurazzi, Mohd Nurazzi and Silverwood, Ian P and Ngah Demon, Siti Zulaikha and Matam, Santhosh K and Abdul Halim, Norhana and Sa'aya, Nurul Syahirah Nasuha and Mohamad, Imran Syakir (2023) Synthesis and characterization of conducting polythiophene wrapped-MWCNT nanocomposites for potential detection of malathion. In: 9th International Conference of Solid State Science and Technology (ICSSST2023), 5 - 7 December 2023, via conference virtual at Unversiti Malaysia Sabah. (Submitted)

Abu Bakar, Mohd Supian (2015) Effects of winding angle on quasi-static axial and lateral crushing behaviour of Carbon Fibre-Reinforced Plastic (CFRP) - filament winding hexagonal tubes. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Ahmad, A and Saad, Mohd Rashdan and Che Idris, Azam and Abdul Rahman, Mohd Rosdzimin and Sujipto, Suriyadi (2016) Aerodynamic performances of cruise missile flying above local terrain. In: Aerotech VI: Innovation in Aerospace Engineering and Technology IOP Conference Series: Materials Science and Engineering, 8-9 November 2016, Kuala Lumpur. (Submitted)

Ahmad, Khairol Amali and Abd Ghani, Nabilah Fathiah and Mohamad Shahimin, Mukhzeer (2021) Optimising ESD countermeasures in 12nm gate oxide semiconductor manufacturing: a robust engineering approach. In: The 3rd International Conference on Applied Photonics and Electronics (InCAPE 2021, 6-7 Oktober 2021, via virtual conference. (Submitted)

Ahmad Raji, Kamarudin (2018) Finite element analysis of gempita 8x8 underbelly deformation subjected to blast loading. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Airil Razlan, Muhammad Khaleed and Daruis, Dian Darina Indah (2023) Design analysis of ergonomic accelerator pedal a case study on Proton Persona SV. In: 5th HFEM Biennial Conference on Human Factor, 13 - 17 August 2023, Langkawi, Malaysia. (Submitted)

Al-Khadher, Omar and Mukhtaruddin, Azharudin and Hashim, Fakroul Ridzuan and Azizan, Muhammad Mokhzaini and Mamat, Husin and Mani, Mohamed (2022) Comparison of non-intrusive load monitoring supervised methods using harmonics as feature. In: 2nd International Conference on Electrical, Computer and Energy Technologies (ICECET 2022), 20 - 22 July 2022, via virtual conference. (Submitted)

Ali, Aidy and Rassiah, Kannan and Othman, Faiz and Lee, Heow Pueh and Tay, Tong-Earn and Hazin, M.S and Megat Ahmad, Megat Mohamad Hamdan (2016) Structural integrity of laminated bamboo composites. In: 3rd International Conference On Defence And Security Technology (DSTC2016), 15-17 August 2016., Marriot Hotel, Putrajaya.. (Submitted)

Aparow, Vimal Rau (2018) Enhancements of armored vehicle stability using adaptive controller. Doctoral thesis, Universiti Pertahanan Nasional Malaysia.

Aris, Muhamad Azahari (2020) Analysis of characterization and performance of material for small arms barrel. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Aziz, Noor Syazwana and Ariffin, Muhammad Shahimi and Gan, Kok Beng and Abd Shattar, Normurniyati (2022) Smoothing of hip angle kinematics data during parachute landing using functional data analysis approach. In: 2022 IEEE 20th Student Conference on Research and Development (SCOReD), 8-9 November 2022, Bangi Resort Hotel, Bangi. (Submitted)

C

Chan, Jun Shen (2021) Investigation of rain resistant chain lubrication performance. Masters thesis, Universiti Pertahanan Nasional Malaysia.

D

Darmawan, Nur Shafa' and Syed Mohd Dardin, Syed Mohd Fairuz and Abdul Rashid, Zuhairi and Abdul Aziz, Akram (2022) Identification of drag force point for small scale fixed-wing type UAV. In: 2022 International Conference on Control, Automation and Diagnosis (ICCAD), 13-15 July 2022, via virtual conference of Lisbon, Portugal. (Submitted)

F

Felix, Stephanie Azlyn and Md Din, Muhamad Faiz and Ishak, Asnor Mazuan and Wang, Jian Li and Idris, Nurul Hayati and Wan Zamri, Wan Fathul Hakim (2023) Investigation of the electrical properties of mineral oils with and without carbon nanotube concentration under different magnetic fields applied in transformer applications. In: Internasional Conference on Applied Physics and Mathematics, 22 - 24 May 2023, Edinburgh, UK. (Submitted)

H

Haniffah, Nur Akmal and Mohd Kamal, Mohamad Shahrizan (2022) Design and fabrication of a simple device for folding towel. In: 11th International Conference On Global Optimization And Its Application (ICoGOIA), 26-27 November 2022, LaCrista Hotel, Melaka. (Submitted)

Haniffah, Nur Akmal and Muhamad Sauki, Nurul Shaqerah and Abd Kadir, Zulkiffli and Hudha, Khisbullah and Amer, Noor Hafizah (2023) Design and fabrication of an automatic cloth folding machine. In: The 2nd International Conference of Advanced Sciences and Engineering (ICASE 2023), 25 - 26 November 2023, Rainbow Paradise Beach Resort, Pulau Pinang, Malaysia. (Submitted)

Hudha, Khisbullah and Abd Kadir, Zulkiffli and Amer, Noor Hafizah and Alawi, A.H and Zubir, Amrina Rasyada (2023) Modeling of crumple zone for vehicle crash simulation using multi-layers Kelvin-Voigt model with non-linear spring optimized using gravitational search algorithm. In: The 23rd International Conference on Control, Automation and Systems (ICCAS 2023), 17 - 20 October 2023, Yeosu, Korea. (Submitted)

Hudha, Khisbullah and Sobri, Normidatul Salwa and Sumasundram, Kavin and Haniffah, Nur Akmal and Abd Kadir, Zulkiffli and Rahmat, Mobd Sabirin (2022) Investigation on the effect of the ferrous particles size on the impact absorption capability of magnetorheological elastomer. In: 18th IEEE Colloquium on Signal Processing and its Applications (CSPA2022), 12 May 2022, via virtual conference. (Submitted)

I

Idris, Abdul Muhaimin (0027) Modelling, simulation and target tracking control of two degree of freedom (2 DOF) gun turret system. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Irahasira, binti said (2021) Drag reduction of wing-in-ground craft by using micro vortex generator. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Isahak, Abdullah Helmi (2021) Evaluation of crack growth behaviour on sandwich metal panel using 2k factorial method. Masters thesis, Universiti Pertahanan Nasional Malaysia.

J

Jusoh @ Tajudin, Mohd Taufik and Hasrin, Hisyamuddin and Mokhtar, Anis Shahida Niza and Ab Jalil, Mohd Hermas (2023) Development of non-destructive method of plasma critical frequency determination. In: The 1st International Conference on Advanced Computing, Systems and Applications (INCASA 2023), 5 - 6 October 2023, via virtual conference. (Submitted)

K

Khairuddin, Faridah Hanim and Mohd Asri, Siti Zubaidah and Misnon, Noor Aina and Md Yusoff, Nur Izzi and Fadzil, Auni Diyana and Ku Ahmad, Ku Zarina (2022) Physicothermal and topography analysis of polyurethane modified bitumen with rediset for WMA application. In: The 4th International Conference on Innovation in Science and Technology (ICIST2022), 14-16 December 2022, Grand Chandi Hotel, Semarang, Indonesia. (Submitted)

Khalis, Suhaimi (2019) Experimental and finite element analysis of human injury prediction subjected to underbelly blast loading. Doctoral thesis, Universiti Pertahanan Nasional Malaysia.

L

Leong, Jin Hoong (2017) Development of digital colorimetric detection technique for arsenic (iii), arsenic (v) and total inorganic arsenic. Doctoral thesis, Universiti Pertahanan Nasional Malaysia.

M

Mansor, Mazuan (2016) Model in the loop simulation of an active front wheel steering system for wheeled armored vehicle. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Mohamed Sohaimi, Arif Shafiq (2017) Fluid-structure interaction simulation of uneven geometries subjected to blast loading. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Mohammad Hakim, Ahmad Sidi (2019) Speed tracking control of in-wheel motor for small scale tracked vehicle. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Mohd Amin, Mohamad Hafiz Ikhwan (2016) Development of external orifice semi active suspension system (EOSASS) for armored vehicle. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Mohd Fazry, A.A and Ku Ahmad, Ku Zarina (2022) Optimization of thermal conductivity of phase change materials/graphene by using taguchi method. In: 11th International Conference On Global Optimization And Its Application (ICoGOIA), 26-27 November 2022, LaCrista Hotel, Melaka via virtual conference. (Submitted)

Mohd Hanafi, Nurfadhillah (2014) Investigation of thermal conductivity and viscosity of nanofluids containing carbon nanotube and surfactants. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Mohd Ismadi, Amal Izzati (2017) Fabrication and characterization of hybrid carbon nanotubes / silicafilled epoxy nanocomposites. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Mohd Nazri, Ainaa Nabilah and Nordin, Norzaima and Bohari, Baizura and Harmin, Mohammad Yazdi and Othman, Maidiana (2023) Comparative study of fluid-structure interaction approaches for high aspect ratio wing applications. In: Aerospace Society Malaysia Conference 2023, 16 December 2023, Putrajaya. (Submitted)

Mohd Sabirin, Rahmat (2019) Application of magneto-rheological devices for impact loads rejection. Doctoral thesis, Universiti Pertahanan Nasional Malaysia.

Mohd Saidi, Norshafiqah and Abdullah, Norli and Janudin, Nurjahirah and Mohd Kasim, Noor Azilah and Osman, Mohd Junaedy and Mohamad, Imran Syakir (2022) Effect of acid treatments and surfactant on MWCNTs nanofluids: structural, morphological and thermal conductivity. In: 31st Regional Conference on Solid State Science and Technology (RCSSST2022), 6-8 September 2022, Hotel Perdana, Kota Bharu, Kelantan. (Submitted)

Mohd Yusoff, Mohd Fazli and Ahmad Zaidi, Ahmad Mujahid and Mohamed Ishak, Saiddi Ali Firdaus and Awang, Mat Kamil and Md Din, Muhamad Faiz and Mukhtaruddin, Azharudin and Ishak, Asnor Mazuan (2022) Experimental study of different materials on electromagnetic damping characteristics. In: International Conference on Innovation in Science and Technology (ICIST 2022), 14-16 December 2022, via virtual conference at Politeknik Semarang, Semarang, Indonesia. (Submitted)

Mohd Yussof, Muhamad Afiq (2022) Yaw control of a 3-Axle single-trailer truck using steerable wheel optimised with gravitational search algorithm. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Muhamad Aiman, Jalani (2020) Shape geometry of floating oscillating water column for wave energy converter at low wave height condition. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Muhamad Paudzi, Mohd Khairul Faidzi and Abdullah, Shahrum and Abdullah, Mohamad Faizal and Azman, Abdul Hadi and Karam Singh, Salvinder Singh (2023) Delamination resistance enhancement for metal laminated panel under the effect of constant cyclic load. In: 7th Symposium on Damage Mechanism, Materials and Structures 2023 (SDMMS 2023), 9 - 20 September 2023, Bangi Resort Hotel, Bangi, Selangor. (Submitted)

Muhammad Nadwi Hakimi, bin Adnan (2021) Rollover prevention system of truck-trailer vehicle using steerable-wheel for middle axle. Masters thesis, Universiti Pertahanan Nasional Malaysia.

N

Noor Azman, Bin Dollah (2021) Optimisation of aerodynamic performance of wig vehicle fuselage using blowing flow control technique. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Nordin, Norzaima and Ahmad Mokhtar, Nur Ezalifah and Othman, Maidiana and Nadzri, Muhamad Nur Alif and Saad, Mohd Rashdan and Ahmad, Mohamed Tarmizi (2023) A parametric study of small-scale offshore vertical axis wind turbines: unlocking potential in low wind profile regions. In: International Conference on Applied Science, Engineering and Advanced Technology (EAW-ICASEAT2023), 24 December 2023, Bayview Beach Resort, Georgetown. (Submitted)

Nordin, Norzaima and Benard, E and Kamal, A. H. A and Ahmad, M. T (2020) Prediction of flow pattern behaviour behind square cylinder using computational fluid dynamic (CFD) approach. The International Journal of Integrated Engineering, Vol.12 (5). pp. 137-145. ISSN 2229-838X

Norshafiqah, Mohamad Saidi (2021) Characterization and determination of thermal properties of carbonbased nanofluids as heat transfer media. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Nur `Izzati, Mohmad Ismail (2020) Hydrodynamics performance of backward bend duct buoy (BBDB) inregular and irregular waveconditions. Masters thesis, Universiti Pertahanan Nasional Malaysia.

O

Othman, Maidiana and Che Osmi, Siti Khadijah and Nordin, Norzaima and Ahmad Sabri, Norakmar and Abd Halimee, Nur Fadzilatulhuda (2023) Mechanical properties of sustainable bamboo fibre and rHDPE composites exposed to water immersion. In: International Conference on Applied Science, Engineering and Advanced Technology (EAW-ICASEAT2023), 22 - 24 December 2023, Bayview Beach Resort, Georgetown. (Submitted)

R

Raja Othman, Raja Nor Izawati and Atira, Fatim and Mohamad, Noor Amieza (2021) Thermomechanical and dielectric properties relationship of hybrid carbon black and nano silica epoxy composites. In: 2nd International Conference on Semiconductor Materials and Technology, 8-9 November 2021, via virtual conference. (Submitted)

Raja Othman, Raja Nor Izawati and Ghani, Afham Za'im and Mohamad, Noor Amieza (2021) Impedance and dielectric characterisation of epoxy composites containing carbon black dan carbon nanotubes. In: 2nd International Conference on Semiconductor Materials and Technology, 8-9 November 2021, via virtual conference. (Submitted)

Raja Othman, Raja Nor Izawati and Ku Ahmad, Ku Zarina and Abdullah, Mohamad Faizal and Ibrahim, Adam Bachtiar (2022) Enhanced mechanical properties of multi-scaled carbon reinforcements in ternary epoxy composites materials. In: Aerotech VIII 2022 Conference, 5 - 7 December 2022, Universiti Putra Malaysia. (Submitted)

Ruslan, Noor Amira Ilyanie and Amer, Noor Hafizah and Hudha, Khisbullah and Abdul Kadir, Zulkiffli and Mohamed Ishak, Saiddi Ali Firdaus and Syed Mohd Dardin, Syed Mohd Fairuz (2023) Independent speed controller for integrated motion control of tracked vehicle with in-track motors. In: The 23rd International Conference on Control, Automation and Systems (ICCAS 2023), 17 - 20 October 2023, Yeosu, Korea. (Submitted)

S

Satar, Mohamad Izzat (2017) Model in the loop simulation of electronically controlled wedge torque coupler for parallel hybrid electric vehicle. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Shaharuddin, Shazreen and Mat Rozi, Nur Izzani and Miskan, Maizatullifah and Hashim, Fakroul Ridzuan and Mohd Sabri, Mohd Salman and Saleh, Mohd Sharil (2023) Predication of ECG cardiac abnormality signal using supervised prediction model. In: 11th IEEE Conference on Systems, Process and Control (ICSPC 2023), 16 December 2023, Hatten Hotel, Melaka. (Submitted)

Subari, Muhammad Akhimullah (2016) Modeling of robotic driver for tele-operated system of a half scaled armored vehicle. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Suhaimi, Nur Sabrina and Ishak, Mohd Taufiq and Md Din, Muhamad Faiz and Mohd Ariffin, Maslina and Mohamad Amin, Nur Aqilah and Abdul Hamid, Mardhiah Hayati (2022) Dissolved gases analysis comparison of electrical faults between rice bran oil and mineral oil insulation systems. In: 2022 IEEE International Conference on Power and Energy (PECon2022), 5 - 6 December 2022, Bayview Hotel, Langkawi. (Submitted)

W

Wan Shuib, Wan Mohd Amin (2018) Numerical solution on the effects of bluff body with slit in micro-channel combustor. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Z

Zaaba, Athirah Najwa (2017) Investigation on the optical and thermal conductivity characteristics of nanofluid. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Zaharin, Muhammad Naiem Naqiuddin and Ku Ahmad, Ku Zarina and Raja Othman, Raja Nor Izawati and Yahaya, Ridwan (2022) Dielectric and mechanical properties of zirconium silicate and polyurethane dielectric elastomer composite. In: 11th International Conference On Global Optimization And Its Application (ICoGOIA), 26-27 November 2022, LaCrista Hotel, Melaka via virtual conference. (Submitted)

Zahrolayali, Nurfathin (2023) Numerical study of scramjet inlet flow control by constant energy deposition. Masters thesis, Universiti Pertahanan Nasional Malaysia.