Items where Subject is "TA Engineering (General). Civil engineering (General)"

Group by: Creators | Item Type
Number of items at this level: 90.

Conference or Workshop Item

A. Rahim, Farah Nadiah and Yusof, Mohammed Alias and Hashim, Fakroul Ridzuan and Ahmad, Khairol Amali and Ismail, Ariffin (2022) Comparison of blast pressure profile for military and commercial explosive with different point of initiation. In: International Conference on Innovation in Science and Technology (ICIST 2022), 14-16 December 2022, via virtual conference at Politeknik Semarang, Semarang, Indonesia. (Submitted)

Abd Kadir, Zulkiffli and Azman, Aina Nabila and Hudha, Khisbullah and Amer, Noor Hafizah and Zubir, Amrina Rasyada and Mohd Alawi, 'Alawiyah Hasanah (2023) Kinematic analysis of double pendulum for exoskeleton walking aid. In: 2023 11th IEEE Conference On Systems, Process & Control, 16 December 2023, Hatten Hotel, Melaka. (Submitted)

Abd Kadir, Zulkiffli and Mohamad Yusri, Mohamad Huzairi and Zubir, Amrina Rasyada and Hudha, Khisbullah and Amer, Noor Hafizah and Haniffah, Nur Akmal (2022) Yaw motion analysis of single-trailer truck using Yaw Amplification Factor (YAF). In: 2022 IEEE International Conference on Systems, Process & Control (ICSPS 2022), 17 December 2022, Melaka. (Submitted)

Abdullah, Nurafrina Arrysya and Kamarudin, Nur Diyana and Makhtar, Siti Noormiza and Mat Jusoh, Ruzanna (2022) COVID-19 social distancing tracking and monitoring system (SDMOS-19). In: 4th International Conference on Innovation in Science and Technology (ICIST 2022), 14 - 16 December 2022, Politeknik Semarang, Semarang, Indonesia (online). (Submitted)

Abu Bakar, Mohd Supian and Manar, Gunasilan and Abdul Rahman, Mohd Rosdzimin and Saad, Mohd Rashdan and Syamsir, Agusril and Najeeb, Mohamamad Imran and Mohammad Rizal, Mohammad Asyraf (2023) An overview of fly-ash geopolymer composites in sustainable advance construction materials. In: 6th Wood and Biofibre International Conference 2023 (WOBIC 2023), 23 - 25 November 2023, Adya Hotel, Langkawi. (Submitted)

Abu Hassan, Zulkifli and Ibrahim, Aniza and Misnon, Noor Aina and Munikanan, Vikneswaran and Abd. Malek, Muhammad Syahmi and Rusli, Muhamad Ikhmal (2023) Blast impulse variations in the NATO STANAG 4569 testing procedures for armoured vehicle protection level evaluation. In: The 2nd International Conference of Advanced Sciences and Engineering (ICASE 2023), 25 - 26 November 2023, Rainbow Paradise Beach Resort, Pulau Pinang, Malaysia. (Submitted)

Abu Hussain, Hidayu Muri and Misnon, Noor Aina and Khairuddin, Faridah Hanim and Vasudevan, Gunalaan and Zulkarnaen, Nadia and Mohamad Pazli, Mohd Aiman Amzar (2024) Durability of coconut shell concrete with silica fume. In: 3rd International Conference on Applied Science, Engineering, Advanced Technology and Social Science, 6 February 2024, Noble Resort Hotel, Melaka. (Submitted)

Ahmad, Khairol Amali and Abd Ghani, Nabilah Fathiah and Mohamad Shahimin, Mukhzeer (2021) Optimising ESD countermeasures in 12nm gate oxide semiconductor manufacturing: a robust engineering approach. In: The 3rd International Conference on Applied Photonics and Electronics (InCAPE 2021, 6-7 Oktober 2021, via virtual conference. (Submitted)

Ahmad, Khairol Amali and Hashim, Fakroul Ridzuan and Adnan, Ja'afar (2024) Defense energy-efficient lora mesh network topologies in disaster operations. In: The 15th International UNIMAS Engineering Conference 2024 (EnCon2024), 14 - 16 February 2024, Waterfront Hotel, Kuching. (Submitted)

Ahmad, Nordila and Ng, Choy Peng and Ismail, Neza and Ridwan Wong, Mohd Muhaimin and Abbas, Fuad and Teik, Hua Law and Zul Bahari, Ahmad Najman 'Azam and Mohd Rofi, Muhamad Faisharulfaizi (2024) A review of major flood events in Malaysia between 1970-2024. In: International Conference on Integrated Engineering and Technology (INTCET 2024), 4 September 2024, Palm Garden Hotel, PutraJaya. (Submitted)

Ahmad, Nordila and Suif, Zuliziana and Jelani, Jestin and Othman, Maidiana (2023) Temporal development of scour around wide piers. In: The 13th International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2023), 14 -16 November 2023, Tsu, Mie, Japan. (Submitted)

Ahmad Ishak, Aina Syahirah and Jelani, Jestin and Soon, Yee Wong and Suif, Zuliziana and Ahmad Mazuki, Ahmad Loqman (2023) Slope stability analysis of a silica sand slope model subjected to surcharge load. In: The 13th International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2023), 14 -16 November 2023, Tsu, Mie, Japan. (Submitted)

Ahmad Jamil, Addzrul Hi-Fi Syam and Abdul Kadir, Jailani and Mohd Jamil, Johanis and Hashim, Fakroul Ridzuan and Shaharuddin, Shazreen and Makmor, Nazrul Fariq (2022) Multilayer perceptron optimization of ECG peaks for cardiae abnormality deteetion. In: 12th IEEE International Conference on System, Computing and Engineering (ICCSCE 2022), 21-22 Oktober 2022, via virtual conference. (Submitted)

Ahmad Jamil, Syahrull Hi-Fi Syam and Alias, Abdul Rashid and A. Rahman, Mohamad Taufik and Hashim, Fakroul Ridzuan and Shaharuddin, Shazreen and Mohd Sabri, Mohd Salman (2022) Cardiac abnormality prediction using logsig-based MLP network. In: 12th IEEE International Conference on System, Computing and Engineering (ICCSCE 2022), 21-22 Oktober 2022, via virtual conference. (Submitted)

Al-Khadher, Omar and Mukhtaruddin, Azharudin and Hashim, Fakroul Ridzuan and Azizan, Muhammad Mokhzaini and Mamat, Husin and Mani, Mohamed (2022) Comparison of non-intrusive load monitoring supervised methods using harmonics as feature. In: 2nd International Conference on Electrical, Computer and Energy Technologies (ICECET 2022), 20 - 22 July 2022, via virtual conference. (Submitted)

Ali, Muhammad Fiqree and Misnon, Noor Aina and Khairuddin, Faridah Hanim and Zulkarnaen, Nadia and Abu Hussain, Hidayu Murni and Vasudevan, Gunalaan (2024) Effect of ground granulated blast furnace slag (GGBS) in coconut shell concrete as partial cement replacement. In: 7th International Conference on Civil and Environmental Engineering (CENVIRON 2024), 2 - 3 September 2024, Bertam Resort, Penang. (Submitted)

Burhanudin, Jariyani and Abu Hasim, Ahmad Shukri and Ishak, Asnor Mazuan and Syed Mohd Dardin, Syed Mohd Fairuz and Abdul Azid, Akram and Burhanudin, Jariyati (2022) Simulation of AC/AC converter using single phase matrix converter for wave energy converter. In: 2022 IEEE International Conference in Power Engineering Applications (ICPEA 2022), 7-8 Mac 2022, via virtual conference. (Submitted)

Che Idris, Azam and Abdul Rahman, Mohd Rosdzimin (2021) DSMC analysis of cryogenic hydrogen expansion in near-vacuum condition. In: 7th International Conference on Mechanical, Manufacturing and Plant Engineering (ICMMPE 2020), 29 November 2021, via virtual conference. (Submitted)

Che Osmi, Siti Khadijah and Hzlan, Syameen and Mohamad Nor, Norazman and Husen, Hapsa and Sojipto, Suriyadi and Misnon, Noor Aina (2021) Mechanical properties of bamboo coated with surface treatment under static loading. In: The 1st World Sustainable Construction Conference 2021 (WSCC2021), 15- 16 Oktober 2021, via virtual conference. (Submitted)

Goh, Thing Thing and Jamaludin, Nur Azliana Akmal and Mohamed, Hassan and Ismail, Mohd Nazri and Chua, Huang Shen (2021) A Comparative study on part-of-speech taggers’ performance on examination questions classification according to bloom’s taxonomy. In: 2021 2nd International Symposium on Automation, Information and Computing (ISAIC 2021), 2 December 2021, via virtual conference. (Submitted)

Hamizak, Siti Norhafizah and Suif, Zuliziana and Jelani, Jestin and Ahmad, Nordila (2024) Dynamic of sediment transport capacity by overland flow: a review. In: International Conference on Integrated Engineering and Technology (INTCET 2024), 4 September 2024, Palm Garden Hotel, PutraJaya. (Submitted)

Hassan, Nur Syamira and Ibrahim, Aniza and Alias, Rohaya and Suif, Zuliziana and Abang Hasbollah, Dayang Zulaikha and Ramli, Ahmad Bukhari (2022) Assessment of ultimate bearing capacity of the pile for jacking 4 & rotary piling method. In: GEOFIESTA2022, 21 - 22 July 2022, Palm Garden, Putrajaya. (Submitted)

Hudha, Khisbullah and Elanggovan, Rakschini and Mohd Alawi, 'Alawiyah Hasanah and Abd Kadir, Zulkiffli and Amer, Noor Hafizah and Haniffah, Nur Akmal (2022) Optimum damping and spring stiffness of semi-trailer truck for minimizing unwanted body motion due to road irregularities using taguchi method. In: 2022 IEEE International Conference on Systems, Process & Control (ICSPS 2022), 17 December 2022, Melaka. (Submitted)

Hudha, Khisbullah and Sobri, Normidatul Salwa and Sumasundram, Kavin and Haniffah, Nur Akmal and Abd Kadir, Zulkiffli and Rahmat, Mobd Sabirin (2022) Investigation on the effect of the ferrous particles size on the impact absorption capability of magnetorheological elastomer. In: 18th IEEE Colloquium on Signal Processing and its Applications (CSPA2022), 12 May 2022, via virtual conference. (Submitted)

Husen, Hapsa and Che Osmi, Siti Khadijah and Mohamad Nor, Norazman and Othman, Ahmad Mazlan and Othman, Maidiana and Abdul Jalil, Mohd Hafizuddin and Mohd Daud, Norhasliya (2024) Experimental investigation on physical and compressive properties of untreated and treated dendrocalamus asper and gigantochloa scortechinii bamboo under monotonic loading. In: 3rd International Conference on Applied Science, Engineering, Advanced Technology and Social Science, 6 February 2024, Noble Resort Hotel, Melaka. (Submitted)

Ismail, Neza and M.I., Mohamed and Wan Mohamed Sabri, Wan Mohamed Syafuan (2021) Surface waviness evaluation of two different types of material of a multi-purpose hall using Terrestrial Laser Scanner (TLS). In: International Conference on Civil Engineering and Construction Technology 2021 (ICECon2021), 14-15 December 2021, via virtual conference. (Submitted)

Ismail, Neza and Wan Mohamed Sabri, Wan Mohamed Syafuan and Sahusi, Shahrul and Mohd Yusoff, Zawil and W.N., Wan Zuhairah (2022) Automatic slope modelling accuracy assessment using point cloud data from unmanned aerial vehicle. In: International Geo-Engineering Conference 2022 and Anti-Collapse Geostructure Competition, 20-21 July 2022, Palm Garden Hotel, Putrajaya. (Submitted)

Ismail, Nor Laili and Musirin, Ismail and Dahlan, Nofri Yenita and Mansor, Mohd Helmi and Sentilkumar, A.V. (2023) Solving combined economic emission dispatch problems using multiobjective hybrid evolutionary-barnacles mating optimization. In: 2023 International Joint Conference on Energy and Environmental Engineering (COEE23), 19 - 21 May 2023, via virtual conference at Malmo University, Sweden. (Submitted)

Jelani, Jestin and Abdul Rahman, Muhammad Shafiq Soffian and Sojipto, Suriyadi and Wan Mohamed Sabri, Wan Mohamed Syafuan and Lee, Min Lee and Ahmad, Nordila (2023) Geotechnical investigation of landslide incident in Hulu Kelang, Malaysia. In: The 13th International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2023), 14 -16 November 2023, Tsu, Mie, Japan. (Submitted)

Jelani, Jestin and Abdul Thalib Abdullah, Mohammad Faizal and Husen, Hapsa and Othman, Maidiana and Suif, Zuliziana and Ahmad, Nordila (2022) Preliminary investigation of CBR value utilizing crushed coconut shell as additive in silty sand. In: The 4th International Conference on Innovation in Science and Technology (ICIST2022), 14-16 December 2022, Grand Chandi Hotel, Semarang, Indonesia. (Submitted)

Jusoh @ Tajudin, Mohd Taufik and Lafond, Olivier and Colombel, Franck and Himdi, Mohamed (2024) Electron-neutral collision frequency determination of plasma medium. In: The 15th International UNIMAS Engineering Conference 2024 (EnCon2024), 14 - 16 February 2024, Waterfront Hotel, Kuching. (Submitted)

Khairuddin, Faridah Hanim and Mohd Asri, Siti Zubaidah and Misnon, Noor Aina and Md Yusoff, Nur Izzi and Badri, Khairiah (2022) Physical and morphological properties of polyurethane modified bitumen under ageing conditions. In: The 8th International Conference on Structure, Engineering & Environment, 10-12 November 2022, via virtual conference of Yokkaichi City, MIE, Japan. (Submitted)

Khairuddin, Faridah Hanim and Mohd Asri, Siti Zubaidah and Misnon, Noor Aina and Md Yusoff, Nur Izzi and Fadzil, Auni Diyana and Ku Ahmad, Ku Zarina (2022) Physicothermal and topography analysis of polyurethane modified bitumen with rediset for WMA application. In: The 4th International Conference on Innovation in Science and Technology (ICIST2022), 14-16 December 2022, Grand Chandi Hotel, Semarang, Indonesia. (Submitted)

Khairulazman, Nurul Afiffah and Jelani, Jestin and Suif, Zuliziana and Ahmad, Nordila and Azmi, Nur Anati and Md Yusoff, Zainuddin and Wan Mohamed Sabri, Wan Mohamed Syafuan and Rosle, Qalam A'zad (2023) Stability of rock slope using kinematic analysis: a case study at Bukit Gemilang, Sungai Besi, Kuala Lumpur. In: International Conference on Applied Science, Engineering and Advanced Technology (EAW-ICASEAT2023), 24 December 2023, Bayview Beach Resort, Georgetown. (Submitted)

Khairulazman, Nurul Afiffah and Jelani, Jestin and Suif, Zuliziana and Umor, Mohd Rozi and Azmi, Nur Anati and Md Yusoff, Zainuddin and Ahmad, Nordila and Abd Halim, Abd Akram Haikal and Rosle, Qalam A'zad (2024) Mineralogical analysis of plutonic and volcanic rocks at selected slope sections of the Kuala Lumpur-Karak Highway. In: International Conference on Integrated Engineering and Technology (INTCET 2024), 4 September 2024, Palm Garden Hotel, PutraJaya. (Submitted)

Makmor, Nazrul Fariq and Ahmad Jamil, Syahrull Hi-Fi Syam and Adnan, Ja'afar and Hashim, Fakroul Ridzuan (2023) Classification of shape aggregate using MLP network based training algorithm. In: International Conference on X-Rays and Related Techniques in Research and Inductry (ICXRI 2023), 23 - 24 Agust 2023, Dorsett Grand Subang Hotel, Subang Jaya, Selangor. (Submitted)

Mat, Muhamad Hadzren and Nagappan, Prakash and Ahmad Jamil, Syahrull Hi-Fi Syam and Hashim, Fakroul Ridzuan and Ahmad, Khairol Amali and Kamal, Kamsani (2023) Explosive blast prediction using MLP network based training algorithm. In: 13th International Conference on Control System, Computing & Engineering (ICCSE 2023), 25 - 26 August 2023, Batu Feringghi, Pulau Pinang. (Submitted)

Mat Razali, Noor Afiza and Mohd Noor, Normaizeerah and Malizan, Nur Atiqah and Mohd Zainudin, Norulzahrah and Ishak, Khairul Khalil (2022) A conceptual model for e-learning supporting tools design based on cue model and Kansei Engineering. In: 9th International Conference On Kansei Engineering And Emotion Research 2022 (KEER 2022), 6-8 September 2022, via virtual conference. (Submitted)

Misnon, Noor Aina and Khairuddin, Faridah Hanim and Zulkifli, Ramadhan and Abu Hassan, Zulkifli and Ibrahim, Aniza (2023) Performance of plain concrete beam retrofitted with textile waste composite. In: International Conference on Applied Science, Engineering and Advanced Technology (EAW-ICASEAT2023), 24 December 2023, Bayview Beach Resort, Georgetown. (Submitted)

Mohamad Amin, Nur Aqilah and Ishak, Mohd Taufiq and Suhaimi, Nur Sabrina (2022) Cellulose particles' effect on the electrical field distribution between palm oil and mineral oil insulation systems. In: 2022 IEEE International Confernce on Power and Energy (PECon2022), 5-6 December 2022, Bayview Hotel, Langkawi. (Submitted)

Mohamad Amir, Muhammad Faiq and Ahmad, Nordila and Wan Mohamed Sabri, Wan Mohamed Syafuan and Suif, Zuliziana and Othman, Maidiana and Jelani, Jestin and Ismail, Neza (2022) Flood hazard potential mapping using GIS: a case study in Sungai Besi Camp, Kuala Lumpur. In: Awam International Conference On Civil Engineering (AICCE'22), 15-17 February 2022, via virtual conference. (Submitted)

Mohd Daud, Mohd Nazrin and Khamsani, Amzar Ikram and Abu Hassan, Zulkifli (2023) Slope stability analysis of granitic residual soil in UPNM campus using strength reduction method. In: The 3rd Internation Conference on Science, Engineering, and Technology (ICSET 2023), 22 - 24 December 2023, Raia Hotel, Kuala Terengganu, Terengganu. (Submitted)

Mohd Nazri, Ainaa Nabilah and Nordin, Norzaima and Bohari, Baizura and Harmin, Mohammad Yazdi and Othman, Maidiana (2023) Comparative study of fluid-structure interaction approaches for high aspect ratio wing applications. In: Aerospace Society Malaysia Conference 2023, 16 December 2023, Putrajaya. (Submitted)

Mohd Sabri, Mohd Salman and Mat Rozi, Nur Izzani and Shaharuddin, Shazreen and Miskan, Maizatullifah and Hashim, Fakroul Ridzuan and Saleh, Mohd Sharil (2024) Multilayer perceptron network of ECG peaks for cardiac abnormality detection. In: The 15th International UNIMAS Engineering Conference 2024 (EnCon2024), 14 - 16 February 2024, Waterfront Hotel, Kuching. (Submitted)

Mokhtar, Nor Izzah and Misnon, Noor Aina and Ibrahim, Aniza (2024) Effect of weathering on salvaged bamboo from bamboocrete panel. In: 7th International Conference on Civil and Environmental Engineering (CENVIRON 2024), 2 - 3 September 2024, Bertam Resort, Penang. (Submitted)

Muhmin, Nur Masyitah and Supian, Latifah Sarah and Chew, Sue Ping and Jelani, Jestin (2024) Assessment of soil-embedded tapered POF sensor for geotechnical monitoring. In: The 15th International UNIMAS Engineering Conference 2024 (EnCon2024), 14 - 16 February 2024, Waterfront Hotel, Kuching. (Submitted)

Muhyidin, Nur Wahidatul Sakhinah and Ahmad, Nordila and Suif, Zuliziana and Jelani, Jestin (2023) Effect of local scour on lateral response of single bridge pier in different soil conditions. In: International Conference on Applied Science, Engineering and Advanced Technology (EAW-ICASEAT2023), 24 December 2023, Bayview Beach Resort, Georgetown. (Submitted)

Munikanan, Vikneswaran and Mustafa, Nur Ainina and Zakaria, Rozana and Yahya, Muhamad Azani and Yusof, Mohammed Alias (2023) Assessment of green rural road criteria based on MyGreen Rural Road Index (MYRRI): A case study in Lumut Perak. In: 12th International Conference on Advanced Materials and Engineering Materials (ICAMEM 2023), 15 - 18 December 2023, Mandarin Hotel, Bangkok, Thailand. (Submitted)

Munikanan, Vikneswaran and Subramaniam, S. Ananthan and Yahya, Muhamad Azani and Yusof, Mohammed Alias and Wong, Wai Loong and Abdul Majid, Norizan (2016) Signage implementation for disaster relief centres during flood disaster in Malaysia. In: 4th Regional Conference on Natural Disaster (RCND 2016), 6-7 September 2016, Seri Pacific, Kuala Lumpur.. (Submitted)

Nagappan, Prakash and Mat, Muhamad Hadzren and Ahmad Jamil, Syahrull Hi-Fi Syam and Hashim, Fakroul Ridzuan and Yusof, Mohammed Alias and Salleh, Mohd Sharil (2023) MLP network prediction for blast explosive based training algorithm. In: 13th International Conference on Control System, Computing & Engineering (ICCSE 2023), 25 - 26 August 2023, Batu Feringghi, Pulau Pinang. (Submitted)

Nordin, Norzaima and Ahmad Mokhtar, Nur Ezalifah and Othman, Maidiana and Nadzri, Muhamad Nur Alif and Saad, Mohd Rashdan and Ahmad, Mohamed Tarmizi (2023) A parametric study of small-scale offshore vertical axis wind turbines: unlocking potential in low wind profile regions. In: International Conference on Applied Science, Engineering and Advanced Technology (EAW-ICASEAT2023), 24 December 2023, Bayview Beach Resort, Georgetown. (Submitted)

Nordin, Norzaima and Bohari, Baizura and Chandrasegaran, Thinesh and As'arry, Azizan and Harmin, Mohammad Yazdi (2022) Load case selection technique for combined modal finite element approach of high aspect ratio wing models. In: The 6th Southeast Asia Workshop on Aerospace Engineering (SAWAE 2022), 20 - 21 Oktober 2022, Ho Chi Minh City, Vietnam. (Submitted)

Nordin, Norzaima and Bohari, Baizura and Jemat, Muhammad Badrulzaman and Harmin, Mohammad Yazdi (2022) Geometrical nonlinearity of high aspect ratio wing and validation via videogrammetric measurement technique. In: The 6th Southeast Asia Workshop on Aerospace Engineering (SAWAE 2022), 20 - 21 Oktober 2022, Ho Chi Minh City, Vietnam. (Submitted)

Othman, Maidiana and Che Osmi, Siti Khadijah and Abd Halimee, Nur Fadzilatulhuda and Nor Azlam, Nurul Ain and Ahmad Sabri, Norakmar (2023) Influence of immersion weathering on the mechanical properties of rHDPE composites reinforced by bamboo fibres. In: 13th International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2023), 14 -16 November 2023, via virtual conference at Tsu, Mie, Japan. (Submitted)

Othman, Maidiana and Che Osmi, Siti Khadijah and Nordin, Norzaima and Ahmad Sabri, Norakmar and Abd Halimee, Nur Fadzilatulhuda (2023) Mechanical properties of sustainable bamboo fibre and rHDPE composites exposed to water immersion. In: International Conference on Applied Science, Engineering and Advanced Technology (EAW-ICASEAT2023), 22 - 24 December 2023, Bayview Beach Resort, Georgetown. (Submitted)

Othman, Maidiana and Che Osmi, Siti Khadijah and Nordin, Norzaima and Jelani, Jestin and Suif, Zuliziana and Ahmad, Nordila (2022) Interface shear strength and the soil softening effect on the soil-geocomposite drainage layer system stability. In: 4th International Conference on Innovation in Science and Technology (ICIST 2022), 14 - 16 December 2022, Politeknik Semarang, Semarang, Indonesia (online). (Submitted)

Othman, Maidiana and Mat Razali, Noor Afiza and Nordin, Norzaima and Mohd Nadri, Mohamad Nazrul Hafiz and Abd Halimee, Nur Fadzilatulhuda and Ahmad Sabri, Norakmar (2024) Water security using internet of things (IoT) for campus community. In: The 15th International UNIMAS Engineering Conference 2024 (EnCon2024), 14 - 16 February 2024, Waterfront Hotel, Kuching. (Submitted)

Raffie, Norfarahana Adibah and Amer, Noor Hafizah and Syed Mohd Dardin, Syed Mohd Fairuz and Hudha, Khisbullah and Mohamed Ishak, Saiddi Ali Firdaus (2021) Preliminary concept modelling, evaluation and selection of robotic arm for light lifting application. In: 2021 7th International Conference On Mechanical Engiineering and Automation Science, 28/10/2021, live via virtual conference. (Unpublished)

Raja Othman, Raja Nor Izawati and Ku Ahmad, Ku Zarina and Abdullah, Mohamad Faizal and Ibrahim, Adam Bachtiar (2022) Enhanced mechanical properties of multi-scaled carbon reinforcements in ternary epoxy composites materials. In: Aerotech VIII 2022 Conference, 5 - 7 December 2022, Universiti Putra Malaysia. (Submitted)

Rasidi, Nor Liyana and Suif, Zuliziana and Hamizak, Siti Norhafizah and Jelani, Jestin and Ahmad, Nordila (2023) Sediment transport capacity performance assessment based on a RUSLE and sediment delivery ratio model-article one. In: International Conference on Applied Science, Engineering and Advanced Technology (EAW-ICASEAT2023), 24 December 2023, Bayview Beach Resort, Georgetown. (Submitted)

Rasool A, Huda and Mohammed, Thamer Ahmed and Ahmad, Nordila (2024) Experimental investigation on the parameters influencing local scour types around scaled triangular nose bridge pier in nonuniform mobile bed. In: International Conference on Integrated Engineering and Technology (INTCET 2024), 4 September 2024, Palm Garden Hotel, PutraJaya. (Submitted)

Shaharuddin, Shazreen and Mat Rozi, Nur Izzani and Miskan, Maizatullifah and Hashim, Fakroul Ridzuan and Mohd Sabri, Mohd Salman and Makhtar, Siti Noormiza (2024) ECG cardiac abnormality signal classification using HMLP network. In: 2024 IEEE International Conference on Artificial Intelligence in Engineering and Technology (IICAIET2024), 26 - 28 August 2024, Kota Kinabalu. Sabah. (Submitted)

Sobri, Normidatul Salwa and Baharuddin, Dhiazul Zaqrie and Haniffah, Nur Akmal and Abd Kadir, Zulkiffli and Hudha, Khisbullah and Aparow, Vimal Rau (2021) Assessment of various additives in magnetorheogical-elastomer for impact applications. In: 2021 9th IEEE Control, System and Process Conference, 10-11 December 2021, live via virtual conference. (Submitted)

Sobri, Normidatul Salwa and Guan Lin, Phang and Haniffah, Nur Akmal and Abd Kadir, Zulkiffli and Hudha, Khisbullah and Rahmat, Mohd Sabirin (2021) Impact testing of magnetorheological elastomer based matrix material and magnetic particle. In: 2021 9th IEEE Control, System and Process Conference, 10-11 December 2021, via virtual conference. (Submitted)

Sojipto, Suriyadi and Che Osmi, Siti Khadijah and Misnon, Noor Aina and Jelani, Jestin and Husen, Hapsa and Mokhtar, Nor Izzah and Zainal Abidin, Ahmad Razin and Abd Rahman, Ahmad Baharuddin (2023) Experimental of steel plates protected with gypsum boards subjected to explosion. In: International Conference on Applied Science, Engineering and Advanced Technology (EAW-ICASEAT2023, 22 - 24 December 2023, Bayview Beach Resort, Georgetown. (Submitted)

Suhaimi, Nur Sabrina and Ishak, Mohd Taufiq and Md Din, Muhamad Faiz and Mohd Ariffin, Maslina and Mohamad Amin, Nur Aqilah and Abdul Hamid, Mardhiah Hayati (2022) Dissolved gases analysis comparison of electrical faults between rice bran oil and mineral oil insulation systems. In: 2022 IEEE International Conference on Power and Energy (PECon2022), 5 - 6 December 2022, Bayview Hotel, Langkawi. (Submitted)

Suhaimi, Nur Sabrina and Ishak, Mohd Taufiq and Md Din, Muhamad Faiz and Mohd Ariffin, Maslina and Razali, Soleha and Mohamad Amin, Nur Aqilah (2016) Breakdown strength of transformer oil filled with carbon nanotubes under various gap distances. In: 3rd International Conference On Defence And Security Technology (DSTC2016), 15-17 August 2016., Marriot Hotel, Putrajaya.. (Submitted)

Suhaimi, Nur Sabrina and Ishak, Mohd Taufiq and Md Din, Muhammad Faiz and Mohd Ariffin, Maslina and Mohamad Amin, Nur Aqilah and Abdul Hamid, Mardhiah Hayati (2022) Dissolved gases analysis of rice bran oil under thermal fault for transformer application. In: 2022 IEEE International Confernce on Power and Energy (PECon2022), 5-6 December 2022, Bayview Hotel, Langkawi. (Submitted)

Suif, Zuliziana and Azmi, Mira Azmiza and Ahmad, Nordila and Othman, Maidiana and Jelani, Jestin (2022) Determination of downstream hydraulics geometry parameters. In: Awam International Conference On Civil Engineering (AICCE'22), 15-17 February 2022, via virtual conference. (Submitted)

Suif, Zuliziana and Hamizak, Siti Norhafizah and Jelani, Jestin and Ahmad, Nordila and Akhtar, Muhammad Izzul (2024) Experimental investigation on slope runoff, sediment, hydraulic parameters under different underlying surface. In: International Conference on Integrated Engineering and Technology (INTCET 2024), 4 September 2024, Palm Garden Hotel, PutraJaya. (Submitted)

Suif, Zuliziana and Jelani, Jestin and Ahmad, Nordila (2023) GIS and remote sensing integration for soil erosion assessment based on a RUSLE model in UPNM catchment. In: The 13th International Conference on Geotechnique, Construction Materials and Environment (GEOMATE 2023), 14 -16 November 2023, Tsu, Mie, Japan. (Submitted)

Vasudevan, Gunalaan and Khairuddin, Faridah Hanim and Misnon, Noor Aina and Abu Hussain, Hidayu Murni and Mohd Asri, Siti Zubaidah and Ng, Choy Peng (2023) The resilient modulus and ageing index of palm kernel shell asphalt mixture for medium traffic flow at different temperatures. In: 5th International Conference on Innovation in Science and Technology (ICIST 2023), 14 - 15 December 2023, via virtual conference at Hotel Grand Candi, Semarang, Indonesia. (Submitted)

Wan Mohamed Sabri, Wan Mohamed Syafuan and Ismail, Neza and Efandi, Daniel (2023) Comparison assessment of pier dimension measurement with different terrestrial laser scanner (TLS) setup location. In: 9th International Conference On Geomatics & Geospatial Technology (GGT 2023), 22 - 25 May 2023, Royale Chulan, Kuala Lumpur. (Submitted)

Wan Mohamed Sabri, Wan Mohamed Syafuan and Ismail, Neza and Rosmee, Muhammad Hakim Jasmee (2024) Evaluating the accuracy of 3D point cloud data of elevated structures using terrestrial laser scanners at various distances. In: International Conference on Integrated Engineering and Technology (INTCET 2024), 4 September 2024, Palm Garden Hotel, PutraJaya. (Submitted)

Yahya, Muhamad Azani and Mohd Ghazali, Zuflin Nazli (2024) Analyzing the paradox of psychological safety in the workplace from top management's perspective. In: The 15th International UNIMAS Engineering Conference 2024 (EnCon2024), 14 - 16 February 2024, Waterfront Hotel, Kuching. (Submitted)

Thesis

Abdul Hamed, Alia Syafiqah (2018) Properties and performance of clay brick containing water treatment sludge (WTS). Masters thesis, Universiti Pertahanan Nasional Malaysia.

Abdul Hamed, Alia Syafiqah (2018) Properties and performance of clay brick containing water treatment sludge (WTS). Masters thesis, Universiti Pertahanan Nasional Malaysia.

Lee, Wei Szer (2020) Behaviour of laminated glass panels subjected to impact and air blast loading. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Md Zen, Dess Iskandar (2014) Development of thulium fiber lasers operating at 1.9 micron region. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Mohammed Alias, Yusof (2012) Performance of hybrid steel fibre reinforced concrete :subjected to air blast loading. Doctoral thesis, Universiti Pertahanan Nasional Malaysia.

Mohd Daud, Norhasliya (2018) Development of bamboocrete multi-purpose panels for affordable housing system. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Mohd Tahir, Siti Munirah (2022) An impact loading simulation of rubber toughened polymethyl methacrylate (PMMA) using abaqus explicit. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Mr, A g u s r i l (2010) Simulation analysis of a foldable carbon fiber reinforced honeycomb sandwich composite bridge. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Mr, Agusril (2014) Performance evaluation of portable bridges using numerical simulations and laboratory tests. Doctoral thesis, Universiti Pertahanan Nasional Malaysia.

Muhamad Azani, Yahya (2020) Determining lean principle factors to achieve sustainable construction with time reduction emphasis. Doctoral thesis, Universiti Pertahanan Nasional Malaysia.

Nor Ali, Umi Nadiah (2018) Performance and life cycle cost analysis (LCCA) for heat resistant wall. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Nor Syamira, binti Hassan (2021) Effect of pile embedded in sand on load carrying capacity and serviceability limits using new installation method. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Ridzuan, Norita (2016) The effect of sugarcane bagasse as natural admixture to prolong concrete setting time. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Rosli, Nur Aini (2016) Effects of supervised driving on young novice drivers’ behaviour. Masters thesis, Universiti Pertahanan Nasional Malaysia.

Wan Ya’acob, Wan Mohd Hanif (2015) Influence of fracture toughness on the impact properties of carbon nanotubes/aramid fibre reinforced composite. Masters thesis, Universiti Pertahanan Nasional Malaysia.

This list was generated on Wed Dec 11 15:00:43 2024 +08.